縫焊機設備調試：

Welding machine equipment debugging:

1、山東自動焊接設備廠家認為其選用焊接電流穩定的焊接電源及品質好的電極滾輪。

1. Shandong automatic welding equipment manufacturers believe that they choose welding power sources with stable welding current and high-quality electrode rollers.

2、在無法明確焊接速度時，務必從慢到快逐步調好狀況。

2. When the welding speed cannot be clearly determined, it is important to gradually adjust from slow to fast to good condition.

3、在無法明確焊接電流時，務必從小快逐步調好狀況。

3. When the welding current cannot be clearly determined, it is important to gradually adjust it from small to fast to good condition.

縫焊機維護與保養

Maintenance and upkeep of welding machines

為了更好地保證機器正常運作，增加應用期限，請遵守下列環節：

In order to better ensure the normal operation of the machine and increase the application period, please follow the following steps:

1、機器須在干燥且少塵土的環境中工作，切不可在震動激烈場所應用。

1. The machine must work in a dry and dust-free environment and must not be used in areas with intense vibrations.

2、在每天應用守機器后務必除塵一回，并給直線導軌再加上潤滑油。

2. After applying the machine every day, it is necessary to thoroughly remove dust and add lubricating oil to the linear guide rail.

3、在每次應用完畢后務必斷開電源及壓縮空氣進入。

3. After each application, be sure to disconnect the power supply and allow compressed air to enter.

4、為保證良好的焊接效果，務必常常用細砂紙（如400#）的給壓板及芯軸上的污物干凈，切不可用不光滑的工具修整及碰撞。

4. To ensure a good welding effect, it is necessary to frequently use fine sandpaper (such as 400 #) to clean the dirt on the pressure plate and core shaft, and do not use unsmooth tools to repair or collide.

5、為保證氣路系統的正常工作，應常常排出過濾器中的水。

5. To ensure the normal operation of the air circuit system, the water in the filter should be frequently discharged.

6、務必按時檢查機械部分及電氣部分的部件有沒有松動、脫落。

6. Be sure to check the mechanical and electrical components on time for looseness or detachment.

油箱環縫焊接專機的設備調試及維護保養相關內容就講解到這里了，希望能夠給您好的幫助，更多事項就來我們網站http://www.hk809.com咨詢吧！

That's all for the equipment debugging and maintenance of the fuel tank circumferential welding machine. We hope to provide you with good help. For more information, please come to our website http://www.hk809.com Consult!